The air fryer is a popular and convenient appliance for cooking, which allows you to prepare food without the use of oil and fat.
Thanks to innovative hot air technology, the air fryer cooks a variety of foods quickly and evenly, preserving their flavor and texture. However, as with any electronic device, problems can sometimes occur with the touchscreen, which can be a source of inconvenience and limitation of use.
Common issues with the touchscreen display
Common problems that a projected capacitive touchscreen may encounter are listed below.
Improper touch response
You may have noticed that the air fryer touchscreen is not responding properly to your touches. This could be in the form of delays, erroneous taps, or improper gesture recognition.
Possible causes for this incorrect response may be due to touchscreen calibration or interference in the environment.
To correct this problem, we recommend recalibrating the touchscreen according to the instructions in the user manual.
Also, make sure there are no sources of electromagnetic interference around the touch panel of the air fryer, such as strong magnets or other electronic devices.
Unresponsive touch screen
If your air fryer touch screen not working by not responding to touches at all, it could be due to software errors or damage to the screen itself.
Causes of software errors can be varied, including bugs in the control board (which will affect the membrane switch) or incompatibility with certain software versions.
If this is the case, it is recommended to first try resetting the air fryer by disconnecting it from the power supply for a while and then reconnecting it.
If the problem persists, a software update may be necessary. Contact the manufacturer of the air fryer for available software updates or additional support.
Damage to the touchscreen display
One of the main reasons why the air fryer touch screen not working is the damage to it. While using air fryers, accidental bumps, drops, or improper use can damage the touchscreen panel, causing it to malfunction.
If you notice cracks, scratches, or other visible damage to the screen, or if the touchscreen stops responding to your touch, you should take appropriate action.
The solution to this problem depends on the model and manufacturer of the air fryers.
First of all, it is recommended to refer to the user manual, which may contain instructions on how to replace the touchscreen or contact information for the manufacturer’s service center.
They can provide recommendations for repairing or replacing the touchscreen. In some cases, manufacturers offer service centers where the air fryer can be sent for touchscreen repair or replacement.
Poor or faulty power cable
Another common problem that leads to air fryer touch screen not working is low voltage electric circuit problems and poor or improper power connections. An alternating voltage or poor power quality can cause problems with the touchscreen.
To correct this problem, pay attention to properly connecting the air fryer to a stable and reliable power surge. Make sure you are using the correct adapter and plug the air fryer into an outlet that meets its voltage requirements.
If you have electrical problems in your home, it is advisable to contact an electrician to fix the problem or use a voltage regulator that will protect the air fryer from voltage variations.
Dirt or moisture on the air fryers display
Another reason the air fryer touch screen not working may also be due to dirt, unwanted grease, or moisture on its surface. Food residue, unwanted grease, or moisture on the touch screen air fryer can cause it to malfunction.
To solve this problem, we recommend unplugging the air fryer and gently cleaning the surface of the touch screen with a soft, damp cloth or tissue. Avoid using harsh cleaning chemicals to avoid damaging the touch screen.
If the dirt is too strong, you can use special cleaners for electronic devices, following the manufacturer’s instructions.
Sometimes problems with the touch screen of the air fryer can be software related or due to errors in the control board, which is related to the membrane switch and many tiny wires.
Restart and factory reset
A simple restart can often fix minor software glitches, but it won’t fix a problem related to a membrane switch.
To do this, disconnect the air fryer from the power source for a few minutes and then reconnect it. This allows the system to reset and may resolve any temporary issues with the air fryer touch screen.
If the touch panel issue persists and you have exhausted other troubleshooting steps, you may consider performing a factory reset.
Keep in mind that a factory reset will restore the control board of the air fryer to its original settings, erasing any customized preferences or settings you have made. Additionally, if the problem is in the membrane switch, it is advisable to contact the manufacturer directly.
Cleaning the touch screen panel
Care and maintenance of your air fryer are important to maintain the performance and longevity of the touch screen.
Cleaning the air fryers around the screen and checking them regularly will help prevent malfunctions and maintain the aesthetic appearance of the device.
Cleaning the touch screen is an integral part of caring for your air fryer. A few simple steps are recommended for proper touch panel cleaning.
First of all, before you start cleaning the touch screen panel, make sure that the air fryer is unplugged to avoid possible damage. Then, use a soft cloth or a special wipe to clean the screen.
This will help remove dust, smudges, or fingerprints. It is important to avoid using harsh chemicals or abrasive materials, as they can damage the screen. For deeper cleaning, you can use special cleaners for electronic devices, following the manufacturer’s instructions.
Maintenance of the touch screen includes regular checks to identify potential problems and take immediate corrective action.
We recommend that you periodically inspect the touch screen for scratches, cracks, or other visible damage. If the screen stops responding or does not respond properly, it may indicate a problem that needs to be corrected.
In conclusion, problems with the air fryer touch screen can be caused by a variety of things, from damage to faulty air fryer cable or software issues. It is important to pay attention to the condition and use of the appliance to avoid damage or problems with its operation.
If there is a problem with the touch screen, appropriate measures, such as replacing, cleaning, or updating the software, should be taken to get it to work properly.
If you are not sure how to fix your touch screen problem, or you have a more severe problem, like a faulty membrane switch, it is recommended that you contact the manufacturer or a certified service center for qualified assistance.
They will be able to provide additional information and guidance on repairing or replacing your air fryer’s touch screen.
Why is my air fryer screen not working?
One of the main causes may be damage to the touch screen. During the use of a fake air fryer, accidental bumps, drops, or improper use can damage the screen, causing malfunctions.
If you notice damage to the screen or if it stops responding to touch, it is recommended to consult the user manual for information on replacing the touch panel or to contact the manufacturer of the air fryer, if the problem is in the membrane switch or control board.
They will be able to provide recommendations on how to repair or replace the touch panel, as well as make the repair itself or replace your air fryer.
How do air fryer touch screens work?
The touch screens of the air fryer are used to control and adjust the appliance. They are usually based on capacitive or resistive sensor technology.
Capacitive sensors use the electrical charge created by the user’s finger to detect a touch. Resistive sensors work by detecting changes in electrical resistance when the screen is touched.
When the user touches the power button on the air fryer screen, the sensors register this touch and transmit information about the control of the appliance.
Why did my new air fryer stop working?
If your air fryer stops working during the cooking process, there may be several factors. First, check the connection of the power cord from the air fryer to the power supply that is connected to the heating element.
Make sure that you are using the correct adapter and that you plug the air fryer’s power cord into an outlet that meets its voltage requirements.
Poor quality or improper power cord connection, as well as a faulty thermal fuse, can cause problems with the operation of the appliance, also check that the air fryer’s door is fully closed.
If you have problems with the electricity in your home, it is advisable to contact an electrician to fix the problem or to use a voltage regulator that will protect the air fryer’s thermal fuse.
If it is the blown fuse, you will need to replace it. The second possible factor is the software. Sometimes malfunctions can be due to errors in the control board and the membrane switch. Try resetting the device for air fry by disconnecting it from the power supply for a while and then reconnecting it.